Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you clean the carburettor of a vintage Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 Epoca - Years 1957-1975
Part: Carburetor
Operation: How do you clean the carburettor of a vintage Fiat 500?

In order to clean the carburettor of a vintage Fiat 500, the piece must be completely disassembled, removing it from its housing inside the engine compartment. Once the carburettor has been removed, it will be necessary to loosen the bolts that fix the manifold by removing it together with the relative gasket. In this way the butterfly valve will be visible, which must in turn be removed by unscrewing the bolts; therefore by disassembling all the other components, it will be possible to clean them individually. Finally all the parts will have to be put back together, placing the carburettor inside its housing.


Posted on 21 April 2023 by ScegliAuto



Guide on how to adjust the idle speed of a vintage Fiat 500
Fiat 500 (1957-1975 / Epoca) In this guide, let's find out some important explanations regarding the carburetion of our vintage Fiat 500. In fact, the carburettor is equipped wit
Vintage Fiat 500 Phasing Instruction
Fiat 500 (1957-1975 / Epoca) Let's see some important instructions to be able to phase the twin-cylinder engine of a vintage Fiat 500. First we go to find the top dead center, tu
How to disassemble the starter motor of a vintage Fiat 500
Fiat 500 (1957-1975 / Epoca) In today's video we see how to proceed with the disassembly and overhaul of the starter motor of the vintage Fiat 500. This tutorial also applies to

    Frequently Asked Questions

    • 500 1957-1975 - How to adjust the idle speed on a vintage Fiat 500? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos