Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to adjust and clean the Fiat Panda washer nozzles

Fiat Panda - Video tutorial

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Windshield washer nozzle
Operation: How to adjust and clean the Fiat Panda washer nozzles

We will see below the instructions which will allow us to adjust and clean the windshield washer nozzles of the Fiat Panda, in simple steps. First we open the bonnet of our car and start by disconnecting the washer nozzle pipe clip; then let's remove the latter from the bodywork, as shown in the video. At this point let's adjust or clean the nozzle with a thin needle (if too clogged, replace it with the new one); we just have to reassemble everything and check the operation of the washer nozzles, following the video tutorial until the end!


Posted on 2 June 2023 by ScegliAuto



How to clean Fiat Panda windshield washer nozzles
Fiat Panda (2003-2012 / 169, MK 2) In this video we will see how to clean the washer nozzles that often plug up due to atmospheric agents and the water itself that forms limescale or o
How to top up the Fiat Panda washer fluid?
Fiat Panda (2003-2012 / 169, MK 2) To be able to top up the Fiat Panda windshield washer fluid, you need to open the bonnet using the special lever located under the steering column. O
Replacement of the windshield washer pump of the Fiat Panda.
Fiat Panda (2003-2012 / 169, MK 2) Let's briefly see in this guide the main steps that will allow us to disassemble and replace the windshield washer pump of the Fiat Panda. First, let

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos