Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the shift knob gaiter in the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2022
Part: Gearshift gaiter
Operation: How to replace the shift knob gaiter in the Fiat 500?

In this tutorial, we can see how to replace the gear shift knob in the Fiat 500, an extremely simple and quick operation. First of all, we locate the slot that divides the knob in half, then we pry it open with a flat-tipped screwdriver and separate the upper half of the knob. Next, we unscrew the bolt using a 10mm wrench, remove the lower half of the knob, detach the base of the shift boot from the center console, and flip it completely so that we can cut the inner plastic strap. Once the boot is removed from the shifter, we can follow the reverse procedure to reassemble everything.


Posted on 16 September 2023 by ScegliAuto



How to replace the gear knob and gaiter of the Fiat 500.
Fiat 500 (2007-2023 / 312) Today's guide will show us how to disassemble and replace the gear knob and gear lever gaiter of the Fiat 500. First, let's get inside the cabin and
Replacement knob and gearshift gaiter on Fiat 500
Fiat 500 (2007-2021 / 312) With a small flat screwdriver or any pointed tool, lift the round top of the knob, on which the gears are drawn. Unscrew the 10 mm bolt at this uncov
Fiat 500 Abarth gear knob replacement
Fiat 500 (2007-2021 / 312) Today we will see how to remove and replace the gear knob of a Fiat 500 Abarth. First of all we go inside the car: with a plastic lever or with somet

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos