Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the ceiling light bulb in the Abarth 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Interior lights ceiling light bulb
Operation: How to replace the ceiling light bulb in the Abarth 500?

In this tutorial we can see how to replace the bulb of the ceiling light in the Abarth 500, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then, using a screwdriver with a flat tip or preferably a plastic spatula so as not to leave marks, lever along the crack of the ceiling light and detach it from the roof. Subsequently disconnect the power connector, separate the base by unlocking the side clips and replace the bulb. To reassemble everything, just follow the reverse procedure.


Posted on 5 April 2024 by ScegliAuto



How to replace the Fiat 500 Abarth license plate bulb?
Fiat 500 (2007-2021 / ) In order to replace the Fiat 500 license plate light bulb, it is necessary to use an object that acts as a lever, such as a slotted screwdriver, to r
How to replace the bulb of the Fiat 500 ceiling light
Fiat 500 (2007-2022 / ) Let's see how to replace the bulb of the ceiling light in a Fiat 500: the ceiling light comes off easily, simply by pulling it towards oneself. In th
How to replace the front headlight bulb of the Fiat 500 Abarth.
Fiat 500 (2007-2023 / 312) The replacement of a front headlight bulb on a Fiat 500 Abarth vehicle follows the same steps used for replacing a front headlight bulb on a Fiat 500

    Frequently Asked Questions

    • 500 2007-2021 - How to replace the light bulbs in the Fiat 500? Read Answer
    • 500 2007-2023 - Why doesn't the interior light of the Fiat 500 come on? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos