Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you remove the front bumper of the Fiat 500 Abarth?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Front bumper
Operation: How do you remove the front bumper of the Fiat 500 Abarth?

The steps to remove the front bumper of the Fiat 500 Abarth are simple and quick to perform independently, thanks also to our short video tutorial. To start, we need to open the front hood and then immediately detach the bumper starting from the right side and then stop and continue from the left side. When detaching the bumper, be careful not to damage the clips; to do this, perform a precise and slow removal without rushing. Once finished, detach the central part, in this way you will have access to the engine head and other internal components.


Posted on 6 May 2024 by ScegliAuto



How to disassemble the front bumper of the Fiat 500 ABARTH
Fiat 500 (2007-2023 / 312) Today we will show you the steps to remove the front bumper of the Fiat 500 Abarth in a simple and fast way, without damaging the internal plastic su
Front bumper removal instructions on Abarth 595 - Fiat 500
Fiat 500 (2014-2022 / 500 X) In today's video we will see the main instructions on how to remove the front bumper on an Abarth 595 and Fiat 500. First of all, let's start by unsc
How to remove the front headlights of the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) Let's find out in this guide how to remove and replace the front lights of the Fiat 500 Abarth. First of all we open the bonnet and start by removing

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos