Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to disassemble the external door handle of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Handle
Operation: How to disassemble the external door handle of the Fiat 500

Today we discover the guide on how to disassemble and replace the external handle of the front door of the Fiat 500, in simple steps. First of all, we open the front door and start removing the internal cover of the handle; then we disassemble and remove the door panel, unscrewing all the fixing screws, as shown in the video. At this point, we unscrew the side screw with a Torx screwdriver and unscrew the handle screws; we remove the handle from the outside and replace it with the new one, applying the reverse procedure if necessary!


Posted on 13 May 2024 by ScegliAuto



Replace the external door handle of the Fiat 500.
Fiat 500 (2007-2022 / ) Today we will see the necessary steps to disassemble and replace the external handle of the front door of the Fiat 500. First, we open the front door
Disassembly of the external handle and Fiat 500 lock
Fiat 500 (2007-2021 / 312) In this video tutorial we will see how to remove, in simple steps, the external handle and the door lock of a Fiat 500. First we open the front door
Removal of the external door handle of the Fiat 500
Fiat 500 (2007-2022 / 312) Let's see today how to disassemble and replace the external handle of the front door of the Fiat 500, but also on the other models of the manufacture

    Frequently Asked Questions

    • 500 2007-2022 - Why does the Fiat 500 door handle not work? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 handle? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos