Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : How to access the wheel of the Fiat Doblo

Fiat Doblo - Video tutorial

Model: Fiat Doblo MK 2, 263, Doblo 2 - Years 2009-2021
Part: Wheel
Operation: How to access the wheel of the Fiat Doblo

The Fiat Doblo is sold with the spare wheel located on the underside of the vehicle. Today we will explain how to access the spare wheel in case you find yourself in a situation where you need to use it. To access the spare wheel, we need to open the trunk of the car and then insert the iron tube into the hole near the lock. Using the torque wrench, we rotate the tube/key until we feel the release of the wheel on the ground, detach the wire and take the wheel to insert it into the housing. To facilitate the removal, lift the vehicle with the jack.


Posted on 15 May 2024 by ScegliAuto



How to remove the steering wheel in the Fiat Doblò?
Fiat Doblo (2000-2009 / 223, Doblo 1, MK 1) In this tutorial we can see how to remove the steering wheel in the Fiat Doblò, a very simple and fast operation. To access the inner bolt, we will f
How to replace the rear shock absorber on the Fiat Doblò?
Fiat Doblo (2000-2009 / 223, Doblo 1, MK 1) In order to replace the rear shock absorber on the Fiat Doblò, the vehicle must be raised so that the bolts that secure the rear wheel to its housing
Guide to disassembling the steering wheel of the Fiat Doblò.
Fiat Doblo (2009-2021 / MK 2, 263, Doblo 2) In this guide, we will see the main steps on how to dismantle and replace the steering wheel of the Fiat Doblò. Firstly, we get inside the car and re

    Frequently Asked Questions

    • Doblo 2009-2021 - Where is the spare wheel of the Fiat doblò located? Read Answer
    • Doblo 2009-2021 - Where is the spare wheel of the Fiat Doblò located? Read Answer
    • Doblo 2009-2021 - Where is the spare wheel on the Fiat Doblò? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos