Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. : Uno

Fiat Uno - Videoguide

Fiat Uno (2010-2021 / Nuovouno, Type327)
How to reset the service light on the Fiat Uno
Today we will discover how to reset the service light for the regular maintenance of the engine oil change, it is really very simple; let's see how to do it on …read all…
Posted on 22 April 2024 by ScegliAuto
Fiat Uno (2010-2021 / Nuovouno, Type327)
How do you reset the Service light on the Fiat Uno?
In order to reset the Service light on the Fiat Uno, you need to connect a diagnostic tool to the OBD port of the vehicle: on this car model, it will be …read all…
Posted on 5 March 2024 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
Replacement of the timing belt on a Fiat Uno.
Through this useful video, we can see all the necessary steps to replace the timing belt on a Fiat Uno, first-generation model with a FIRE engine without …read all…
Posted on 30 November 2023 by ScegliAuto
Fiat Uno (2010-2021 / Nuovouno, Type327)
What is the fuse diagram of the Fiat Uno?
In this video, we can see the fuse diagram of the Fiat Uno and the position of their respective boxes, which is useful in case we need to check the fuse of a …read all…
Posted on 28 October 2023 by ScegliAuto
Fiat Uno (2010-2021 / Nuovouno, Type327)
Where are the fuses located in the Fiat Uno?
The fuses of the Fiat Uno are all contained within the appropriate fuse box located in the car: this is unique and is located inside the engine compartment. It …read all…
Posted on 6 August 2023 by ScegliAuto
Fiat Uno (2010-2021 / Nuovouno, Type327)
How to reset the service on the Fiat Novo Uno
To reset the service warning light on the car, proceed as follows: access the driver's seat and connect the diagnostic system (PDL 5600) to the OBD socket, …read all…
Posted on 20 November 2022 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
How to remove the central panel of the dashboard of the Fiat Uno?
In order to remove the central panel of the dashboard of the Fiat Uno, the drawer in the compartment above the panel must be opened and the drawer removed. …read all…
Posted on 4 May 2024 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
Disassembly of the Fiat Uno Fire fuel pump
In today's video guide we will see how to remove and replace the fuel pump of a Fiat Uno Fire, following these main instructions. First we go to the rear of …read all…
Posted on 29 March 2024 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
Removing the starter motor on Fiat Uno Fire
In this video tutorial we will see how to disassemble and replace the starter motor on a Fiat Uno with Fire engine, following these simple steps. First we open …read all…
Posted on 22 January 2024 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
Disassembly of the rear light Fiat Uno
In this video tutorial we will see how to remove the rear light of a Fiat Uno, following these simple steps. First we open the boot lid and disconnect the …read all…
Posted on 7 January 2024 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
Quick assembly of oil pan
Fitting the oil pan could appear to be a complex and delicate operation but in reality it is a simple practice to carry out even without resorting to a …read all…
Posted on 26 June 2023 by ScegliAuto
Timing belt (1) -board computer (1) Checks and maintenance (2) Oil pan (1) Dashboard (1) Tail light (1) Starter motor (1) Fuel pump (1) Fuse box (2)

See also:

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos