Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How do you check the power steering oil level on the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Power steering oil
Operation: How do you check the power steering oil level on the Ford Focus?

In order to check the power steering oil level on the Ford Focus, you need to open the bonnet, so that you can identify the tray that contains it: this is located in the internal part of the engine compartment, in the upper left part immediately below to the windshield. To check the oil level, open the tank cap and make sure that the quantity of oil is between the two MIN and MAX marks. If necessary, it will be possible to top up by adding the required quantity of oil; after topping up, you will need to close the tank with its cap and then also close the bonnet.


Posted on 1 May 2023 by ScegliAuto



How to replace the power steering fluid on the Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) In today's video tutorial we will see the instructions on how to replace the power steering oil of the power steering on the Ford Focus second series
How to replace the power steering pump of the Ford Focus 2.0L
Ford Focus (2004-2011 / MK 2, Focus 2) Today's main steps will show us the procedure for disassembling and replacing the hydraulic power steering pump of the Ford Focus 2.0L. First, we ope
Common causes of power steering errors in the Ford Focus.
Ford Focus (2011-2018 / MK 3) In this video, we delve into the causes of the power steering failure in the Ford Focus and Ford C-max. The internal malfunction of the steering unit

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos