Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the bushing of the gear shift lever of the Ford Focus Mk2.

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Bushings
Operation: How to replace the bushing of the gear shift lever of the Ford Focus Mk2.

The guide shows how to replace the gear lever linkage on the Ford Focus Mk2. The first step is to locate the part to be replaced, located on the left side of the gearbox. At this point, it is necessary to disconnect the lever from the control pin and remove the old bushing, using a screwdriver. Then, take the new bushing and press it in, so that it fits into the hole. Once inserted and aligned, rotate it until the central axes of the holes match. Adjust the edges correctly before reinstalling it on the gearbox.


Posted on 10 June 2023 by ScegliAuto



How to replace the gear knob in a 2011 Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In the 2011 Ford Focus, the gear shift knob is screwed onto the lever and is therefore very easy to remove, even for those with little experience. Ad
Guide to replacing the gear knob and gear shift boot of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will discover the instructions for disassembling and replacing the knob and the gear lever gaiter of the Ford Focus. First of all, we get in
How do I change the shift position sensor of the Ford Focus?
Ford Focus (1998-2004 / MK 1) In today's video tutorial we will see how to remove and replace the Ford Focus gear position sensor. First of all we lift the car and go to locate ou

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos