Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to remove the rear seat of a Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Rear bench seat
Operation: How to remove the rear seat of a Ford Fiesta

In this video, we see how to remove the rear seat on a Ford Fiesta: the first thing to do is to remove the three screws located at the base of the seat, one at each end and one in the center. At this point, we need to lift the cushion backwards to free it from the clips, and then pull it towards us to remove it. The backrests are held by T40 Torx bolts. There are eight in total, so they all need to be removed, and this way we can remove the 40 backrest and then the 60 backrest, and at this point the rear seat has been completely removed.


Posted on 14 September 2023 by ScegliAuto



How to remove the front seat of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we begin, we will need to open the front door of our Ford Fiesta. Let's start by pulling the front seat all the way back on its tracks. After
Remove the rear seats of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Are you going to remove the rear seats of your Ford Fiesta? Let's see in this video that explains how to do it. First we move the seat of the seat up
How do you remove the front seat of the Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) The removal of the front seat of the Ford Fiesta is done by loosening the screws that fix the seat to the appropriate sliding rails: these screws wil

    Frequently Asked Questions

    • Fiesta 2017-2023 - How are the rear seats on the Ford Fiesta? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos