Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to disassemble the cylinder head of the Ford Fiesta.

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Engine head
Operation: How to disassemble the cylinder head of the Ford Fiesta.

The main information today will show us how to dismantle and replace the cylinder head and its gasket of the Ford Fiesta petrol. First, we open the car's engine hood and start dismantling and removing the intake manifold that is located above the engine, by unscrewing the fixing screws and disconnecting the various pipes; then we unscrew the screws of the cylinder head cover, removing all the spark plugs first, as shown in the video. To remove the cylinder head, it will be necessary to disconnect the timing belt first; then we also replace the cylinder head gasket, following the video tutorial until the end!


Posted on 21 December 2023 by ScegliAuto



Guide to disassembling the cylinder head of the Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Today we will discover the instructions that will allow us to disassemble the cylinder head and replace the gasket of the Ford Fiesta, with a gasolin
Cylinder head maintenance
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) The cylinder head gasket is an element interposed between the cylinders and the cylinder head which serves to ensure that oil and combustion fumes do
How to remove the spark plugs on Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Let's see how to remove the spark plugs of a Ford Fiesta. We raise the front hood to access the Fiesta's engine. We disassemble the motor cover panel

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos