Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Edge
    4. : How to reset the air conditioning on a 2012 Ford Edge.

Ford Edge - Video tutorial

Model: Ford Edge MK 1 - Years 2006-2014
Part: Air conditioning
Operation: How to reset the air conditioning on a 2012 Ford Edge.

In this video, we see a 2012 Ford Edge blowing hot air from the air conditioner, or at least from the driver's side, while it blows cold air correctly from the passenger side. How can we fix this malfunction? We will need to reset the air conditioning system. We will need to simultaneously press the air conditioner power button with the defrost button, but briefly, without holding them down for long. The system will shut down completely. At this point, we can press the air conditioning system power button again, and at that point, everything should start working correctly again.


Posted on 10 February 2024 by ScegliAuto



To reset the air conditioning of the Ford Edge.
Ford Edge (2006-2014 / MK 1) To unlock the air conditioning of a 2013 Ford Edge, it is necessary to perform a reset, as the air conditioning in this type of Ford vehicle tends to
How to reset the air conditioner of the 2013 Ford Edge.
Ford Edge (2015-2023 / MK 2) Resetting the air conditioning system of the 2013 Ford Edge is a very simple operation that can be performed independently and in just a few moments.
How to recharge the air conditioning of the Ford Edge
Ford Edge (2006-2014 / MK 1) To recharge the air conditioning of the Ford Edge yourself, in the video, they obtained a bottle of appropriate liquid; so, we open the engine hood,

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos