Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to remove the front seat of the Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Seat
Operation: How to remove the front seat of the Ford Focus

The steps indicated in this guide will show us how to disassemble and replace the front seat of the Ford Focus. First, we open the front and rear doors of the car and start unscrewing all the fixing screws we find on the front seat guides, moving the seat back and forth to discover them all; to do this we use a torx key, as shown in the video. At this point, we disconnect the electrical connector found underneath, then remove the driver's or passenger's seat; we apply the reverse process for reassembly!


Posted on 26 February 2024 by ScegliAuto



Disassembly of the seat of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) We want to remove the front seat of the car. Let's see the disassembly of the front seat of a Ford Focus. We move the seat back and bring the seat up
Ford Focus front seat removal
Ford Focus (1998-2004 / MK 1) In this video tutorial we will see how to remove the front seats of a Ford Focus. The procedure for disassembling the front seat does not vary much f
Disassembly of the front seat of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video you can see how to remove the front seat from a Ford Focus. It is an operation that can be carried out in total autonomy, without resor

    Frequently Asked Questions

    • Focus 2011-2018 - How do you replace the rear seats of the Ford Focus? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos