Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ecosport
    4. : Replacement of the front brake disc of the Ford Ecosport

Ford Ecosport - Video tutorial

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Brake discs
Operation: Replacement of the front brake disc of the Ford Ecosport

Today we will see the main steps useful for disassembling and replacing the front brake disc and pads of the Ford Ecosport. First of all, lift the vehicle and start by removing the front wheel; unscrew the fastening screws of the front brake caliper to remove it from the disc, then remove the support, as shown in the video. At this point, unscrew the central nut with a socket wrench with extension to remove the brake disc, replacing it with a new one; then install the new brake pads accordingly, reassembling everything!


Posted on 23 March 2024 by ScegliAuto



Replacing the front brake discs of Ford Ecosport 1
Ford Ecosport (2012-2023 / BK, MK 1) In today's video tutorial we will see how to disassemble and replace the front brake discs and pads of the first series Ford Ecosport, in simple step
How to replace the rear drum brake on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before we begin, we will need to lift the rear end of our Ford Ecosport. Let's start by disassembling the rear wheel, unscrewing the relative fixing
How to remove the front door panel insert of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before we can start, we will have to go and open the front door of our Ford Ecosport. Let's start by inserting the tip of a flat-blade screwdriver in

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos