Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gasgas
    3. :
  3. Ec 300
    4. : How do you replace the throttle valve of the GasGas EC 300?

Model: Gasgas Ec 300
Part: Valve
How do you replace the throttle valve of the GasGas EC 300?

In order to replace the throttle valve of the GasGas EC 300, you need to remove the entire throttle body of the motorcycle from its housing: this will be connected in the area between the cylinder and the intake duct. Once the throttle body has been removed by loosening the screws and disconnecting all the connectors, you can proceed by disconnecting the connectors attached to it; then the valve can be removed from inside the throttle body and the new one inserted. Finally, you can reassemble everything and check its operation.


Posted on 8 April 2024 by ScegliAuto



How do you replace the piston of the GasGas EC 300?
Ec 300 The piston replacement on the GasGas EC 300 is carried out by removing the saddle and part of the fairing, in order to have access to the mechanical
How to change the front brake oil of Gasgas EC 300
Ec 300 Let's see in this guide, how to bleed and replace the oil of the front brakes on the Gasgas EC 300 enduro motorcycle. First of all, unscrew the screw
How to replace the carburetor of the Gasgas EC 300.
Ec 300 Today we will see how to disassemble and replace the carburetor of the Gasgas EC 300 enduro motorcycle, following these simple steps. First, we put o

How do you replace the piston on the Sherco SE 250?

The Sherco SE 250 piston is replaced by loosening the screws that secure the cylinder in the upper part of the engine block: in order to remove this cylinder it will also be necessary to disconnect the connectors connected to the engine block itself. Once the cylinder has been removed, it will be possible to access the underlying piston, which will have to be detached from the relative connecting rod by removing the relative fixing ring. When this in turn has been removed, it will be possible to insert the new spare part, then also installing the cylinder.

Watch the video!


by ScegliAuto

More videos