Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Geely
    3. :
  3. Lc
    4. : Position and diagram of the fuses of the Geely LC.

Geely Lc - Video tutorial

Model: Geely Lc MK 1 - Years 2008-2016
Part: Fuse box
Operation: Position and diagram of the fuses of the Geely LC.

Let's see in this short and simple guide, the location and diagram of the fuses of the Geely LC, following the instructions below. First, we get into the car to access the internal fuse box; we find it on the driver's side, by removing the plastic cover next to the steering wheel. Instead, we find the external fuse box in the engine compartment, next to the battery; on the inside of the cover, we will find the fuse diagram, also available in the owner's manual, so that we can locate and replace any faulty fuse!


Posted on 4 July 2023 by ScegliAuto



Geely Lc fuse box
Geely Lc (2008-2016 / MK 1) Also in this car as well as in almost all cars there are two fuse boxes, the first is located in the engine compartment immediately next to the air f
How to adjust the handbrake of the Geely LC
Geely Lc (2008-2016 / MK 1) Today we will see, in this short and simple guide, how to adjust the handbrake of the Geely LC, following the instructions below. First we get on boa
How to remove the door panel in the Geely LC?
Geely Lc (2008-2016 / MK 1) In this tutorial we can see how to remove the door panel in the Geely LC, a very simple operation. First of all, unscrew the single screw of the inte

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos