Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. Gv80
    4. : How do you open the rear hatch of the Genesis GV80?

Genesis Gv80 - Video tutorial

Model: Genesis Gv80 JX1, MK 1 - Years 2020-2024
Part: Checks and maintenance
Operation: How do you open the rear hatch of the Genesis GV80?

Different methods can be used to replace the rear hatch of the Genesis GV80: first, it is possible to press the button located at the base of the rear wiper; another way to open the hatch is to use the appropriate button on the remote control. A further opening method is to approach the hatch with the key in your pocket, so that the hatch can open automatically; once it has been opened, the closure will also be automatic. Therefore, it will be possible to allow the hatch to close automatically by pressing the button next to the actuator.


Posted on 18 June 2023 by ScegliAuto



How do you remove the rear light of the Genesis GV80?
Genesis Gv80 (2020-2024 / JX1, MK 1) To replace the rear light of the Genesis GV80, you need to open the rear door of the car so that you can access the plastic cover located next to the
How to replace the battery in the remote control of the Genesis GV80?
Genesis Gv80 (2020-2024 / JX1, MK 1) As we can see in this tutorial, replacing the Genesis GV80 remote control battery is a very quick and easy operation. To do this we will need a small
How do you change the engine oil of the Genesis GV80?
Genesis Gv80 (2020-2024 / JX1, MK 1) In order to change the engine oil of the Genesis GV80 you have to unhook the rivets that secure the protective panel of the lower part of the car, so

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos