Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. :
  3. Dna 125
    4. : How do you replace the spark plug on the Gilera DNA 125?

Model: Gilera Dna 125
Part: Spark plugs
How do you replace the spark plug on the Gilera DNA 125?

In order to replace the spark plug of the Gilera DNA 125, you need to disconnect the corresponding coil: these two parts will be located above the engine cylinder and will be accessible from the right side of the vehicle. Once the ignition coil has been disconnected, you will be able to locate the spark plug underneath, which can be removed from its seat using the appropriate socket wrench. After removing the old spark plug, you can insert the new one into its seat, connecting it to the coil and verifying that everything is functioning properly.


Posted on 5 April 2024 by ScegliAuto



How to change the engine oil on the Gilera Dna 125 - 50
Dna 125 In this video tutorial we will see how to replace the engine oil and oil filter on the Gilera Dna 125 - 50, following these simple steps. First of al
How do you disassemble the Gilera DNA 125 engine?
Dna 125 In order to disassemble the engine of the Gilera DNA 125, first you need to remove it from its housing by unscrewing the screws that hold it in place
How do you replace the piston of the Gilera DNA 125?
Dna 125 To replace the piston of the Gilera DNA 125, you need to loosen the screws that secure the motorcycle seat so that it can be removed from its housing

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos