Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. : Runner Vxr 200

Gilera Runner Vxr 200 - Videoguide

Gilera Runner Vxr 200
How do you replace the side fairing of the Gilera Runner VXR 200?
In order to replace the side fairing of the Gilera Runner VXR 200, you need to lift the seat so that you can access the underseat compartment: inside it, there …read all…
Posted on 21 October 2023 by ScegliAuto
Gilera Runner Vxr 200
How do you replace the Gilera Runner VXR 200 belt?
In order to replace the belt of the Gilera Runner VXR 200 it is necessary to loosen the bolts that fix the crankcase cover located at the rear wheel, on the …read all…
Posted on 4 June 2023 by ScegliAuto
Gilera Runner Vxr 200
How to change the engine oil of the Gilera Runner XVR 200?
To be able to change the engine oil of the Gilera Runner XVR 200 you have to go to the lower part of the bike, where you can find the oil tank drain plug: the …read all…
Posted on 24 September 2022 by ScegliAuto
Gilera Runner Vxr 200
How do you replace the belt on the Gilera Runner VXR 200?
The transmission belt of the Gilera Runner VXR 200 is replaced by loosening the bolts that secure the crankcase cover located at the rear wheel, from the left …read all…
Posted on 25 April 2024 by ScegliAuto
Gilera Runner Vxr 200
How to carry out a complete service on Gilera Runner VXR 200
In this video we will see how to carry out the complete maintenance service, by changing the engine oil and oil filter, transmission belt and spark plug, on a …read all…
Posted on 7 February 2024 by ScegliAuto
(1) (2) Engine oil (2)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos