Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Harley Davidson
    3. :
  3. Sportster
    4. : How to replace the headlight bulb on the Harley-Davidson Sportster?

Model: Harley Davidson Sportster
Part: Headlight bulb
How to replace the headlight bulb on the Harley-Davidson Sportster?

In this tutorial, we can see how to replace the headlight bulb on the Harley-Davidson Sportster, an extremely simple and quick operation. First of all, make sure the key is not inserted, then position yourself in front of the headlight, locate the screw on the bottom of it and unscrew it using a Phillips screwdriver. Then separate the headlight from the base, disconnect the power connector, and remove the rubber cap. To remove the bulb, simply unhook the metal clip, and to reassemble everything, just follow the reverse procedure.


Posted on 28 April 2024 by ScegliAuto



How do you replace the headlight bulb on the Harley Davidson Sportster?
Sportster .. To replace the headlight bulb on the Harley Davidson Sportster, you need to loosen the bolt located at the bottom of the headlight to remove its..
How do you replace the rear headlight bulb on the Harley Davidson Sportster?
Sportster .. replacing the rear headlight bulb on the Harley Davidson Sportster involves loosening the two side screws that secure the headlight inside its housing,..
How do you replace the taillight bulb on the Harley Davidson Sportster?
Sportster .. to replace the rear headlight bulb of the Harley Davidson Sportster, you need to loosen the two side screws that secure the headlight to its housing,..

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos