Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Honda
  4. : Cr Z

Honda Cr Z - Videoguide

Honda Cr Z (2010-2016 / MK 1)
How to reset the service in the Honda CR-Z?

In this tutorial we can see how to reset the service in the Honda CR-Z, an extremely simple and quick operation, to be carried out only once all scheduled …read all…
Posted on 27 March 2024 by ScegliAuto
Honda Cr Z (2010-2016 / MK 1)
How to replace a pollen filter on Honda CR Z

In this video tutorial we can see how it is possible to replace the pollen filter on Honda CR Z, following some simple steps: the first thing we have to do is …read all…
Posted on 11 August 2022 by ScegliAuto
Honda Cr Z (2010-2016 / MK 1)
How to install the light trims on the door sills

This tutorial shows you step by step how to install the "CRZ" light finish on the sill of each door. First of all, get the kit in question. Remove the cover of …read all…
Posted on 27 July 2023 by ScegliAuto
Honda Cr Z (2010-2016 / MK 1)
Wheel splash guard installation

This video shows us how to install splash guards on all four wheels. To install them on the front wheels we will have to identify the right position and make a …read all…
Posted on 25 July 2023 by ScegliAuto
Honda Cr Z (2010-2016 / MK 1)
Replacement rubber mats

This video shows us how to replace the rubber mats; Once the old rubber mats have always been removed, if previously in possession, we will replace them with …read all…
Posted on 25 July 2023 by ScegliAuto
Honda Cr Z (2010-2016 / MK 1)
Inserting the rubber mat on the bottom of the boot

To protect the bottom of the boot and ensure the adherence of loads to the bottom of the boot, it may be useful to insert a special rubber mat suitably shaped: …read all…
Posted on 21 July 2023 by ScegliAuto
Honda Cr Z (2010-2016 / MK 1)
Additional armrest mounting

Make sure you have the anti-theft code for your car stereo Disconnect the negative cable from the battery. Remove the lower center of the tunnel. Insert your …read all…
Posted on 10 July 2023 by ScegliAuto
Checks and maintenance (1) Cabin air filter (1) Accessory Kit (5)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos