Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Vision 110
    4. : How do you replace the air filter of the Honda Vision 110?

Model: Honda Vision 110
Part: Air filter
How do you replace the air filter of the Honda Vision 110?

The procedure for replacing the air filter on the Honda Vision 110 involves loosening the screws that secure the cover located on the left side of the motorcycle, immediately above the transmission. Once the screws securing the panel have been loosened, it will be possible to locate the air filter underneath, which must be removed from its housing. After removal, the new filter can be inserted, covering everything with the appropriate cover and securing the lid with the previously removed screws, ensuring that everything is functioning properly.


Posted on 18 May 2024 by ScegliAuto



How do you replace the air filter on the Honda Vision 110?
Vision 110 To replace the air filter on the Honda Vision 110, you need to start by loosening the screws that secure the cover located on the left side of the mo
How do you replace the Honda Vision 110 air filter?
Vision 110 In order to replace the Honda Vision 110 air filter, you need to loosen the screws that secure the cover that protects the crankcase located on the l
How do you replace the transmission of the Honda Vision 110?
Vision 110 In order to replace the transmission of the Honda Vision 110, you need to loosen the screws that secure the cover located on the left rear part of th

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos