Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Accord
    4. : Replacement of the battery of the Honda Accord key remote.

Honda Accord - Video tutorial

Model: Honda Accord MK 10 - Years 2018-2023
Part: Battery
Operation: Replacement of the battery of the Honda Accord key remote.

Today we are going to see the instructions that will allow us to disassemble and replace the battery of the remote control key of the Honda Accord. First, take our remote control and start removing the physical key from inside it; then, pry open the slot created to open the remote control in two parts, thus accessing the electronic board and the battery, as shown in the video. At this point, remove and replace the battery with the new one, of the correct type (in this case a CR 2032 3V); insert it in the correct direction and finally close the remote control!


Posted on 9 May 2024 by ScegliAuto



How to replace the battery in the Honda Accord key
Honda Accord (2018-2023 / MK 10) Replacing the battery of a Honda Accord key is a very simple operation that can be done in a few easy steps. To begin the replacement, remove the eme
How to replace the Honda Accord remote control battery?
Honda Accord (2018-2023 / MK 10) Replacing the Honda Accord remote control battery, as we can see in this tutorial, is an extremely simple and fast operation. To do this, we will not
How to replace the Honda Accord remote control battery?
Honda Accord (2002-2007 / MK 7) In this tutorial we can see how to replace the Honda Accord remote control battery, a very simple and fast operation. To do this, we will need a smal

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos