Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Hr V
    4. : Resetting the TPMS of the Honda HR V MK2

Honda Hr V - Video tutorial

Model: Honda Hr V MK 2, RU - Years 2016-2022
Part: Tires
Operation: Resetting the TPMS of the Honda HR V MK2

After restoring the tire inflation pressures of the Honda HR V, we proceed to reset the TPMS system that warns us in case of decreases in the set values. Sitting in the driver's seat, we turn on the instrumentation, use the controls found to the right of the steering wheel to select the Vehicle Settings screen on the display. Within this menu, we select TPMS Calibration and then Calibration, we will see the message Start calibration appear and when this disappears we will have completed the reset operation.


Posted on 16 May 2024 by ScegliAuto



How to reset the tire indicator light in the Honda HR-V?
Honda Hr V (2016-2022 / MK 2, RU) As we can see in this tutorial, resetting the tire indicator in the Honda HR-V is an extremely simple and quick operation. Before proceeding, make su
How to reset the TPMS on the Honda HR-V.
Honda Hr V (2016-2022 / MK 2, RU) Below we see how to reset the low tire pressure warning light. It is necessary to start the TPMS calibration every time: • Adjust the pressure in one
How to reset the tire pressure warning light on the 2017 Honda HR V.
Honda Hr V (2016-2022 / MK 2, RU) If you want to independently get rid of the tire pressure alarm light on your Honda Hr V Mk2 (2017 model year), you just need to follow the steps des

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos