Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husaberg
    3. :
  3. Fs 650 Supermoto
    4. : How do you top up the coolant on the Husaberg FS 650?

Model: Husaberg Fs 650 Supermoto
Part: Antifreeze liquid
How do you top up the coolant on the Husaberg FS 650?

In order to perform the coolant top-up on the Husaberg FS 650, you need to remove the cap that provides access to the tank containing the coolant: this can be found on the right side of the motorcycle, near the crankshaft and next to the water pump itself. Once this cap has been removed, it will be possible to add the necessary amount of liquid for the top-up: once the required amount of liquid has been added, it will be possible to close everything with the appropriate cap, making sure that everything is functioning correctly.


Posted on 14 November 2023 by ScegliAuto



How do you adjust the valves on the Husaberg FS 650?
Fs 650 Supermoto To adjust the valves on the Husaberg FS 650, you need to loosen the screws that secure the valve cover, which is located on the top of the engine blo
How do you replace the piston of the Husaberg FS 650?
Fs 650 Supermoto In order to replace the piston of the Husaberg FS 650, you need to loosen the screws that secure the engine block to its housing, so that it can be c
How do you disassemble the engine of the Husaberg FS 650?
Fs 650 Supermoto The disassembly of the Husaberg FS 650 engine is done by removing the bolts that fix it to its supports in the lower part of the seat: once these bol

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos