Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Husqvarna Sm 125 - Videoguide

Husqvarna Sm 125
How do you replace the transmission of the Husqvarna SM 125?
To replace the transmission of the Husqvarna SM 125 you must first remove the old sprocket and install a new one, following the operations shown in the video. …read all…
Posted on 8 April 2024 by ScegliAuto
Husqvarna Sm 125
Replacement brake pads in the Husqvarna SM 125.
Before starting with the replacement of the front brake pads of our Husqvarna SM 125, we place our motorcycle in a stable and safe way, on the stand, in order …read all…
Posted on 1 April 2024 by ScegliAuto
Husqvarna Sm 125
How do you change the pads and oil on the Husqvarna SM 125?
In order to replace the brake pads of the Husqvarna SM 125 you have to loosen the bolts located on the brake caliper, near the fork. Once the bolts have been …read all…
Posted on 27 February 2024 by ScegliAuto
Husqvarna Sm 125
How do you replace the piston on the Husqvarna SM 125?
To replace the piston of the Husqvarna SM 125 you must first open the coolant drain plug and collect it in a tank. Then it will be necessary to remove the …read all…
Posted on 22 February 2024 by ScegliAuto
Husqvarna Sm 125
How do you replace the discs on the Husqvarna SM 125?
To replace the discs of the Husqvarna SM 125 you have to start by disassembling the front wheel, removing the screws at the foot of the forks and the nut that …read all…
Posted on 20 February 2024 by ScegliAuto
Husqvarna Sm 125
How to do the service on the Husqvarna SM 125
In this video tutorial we will see how to replace the engine oil, performing the regular routine maintenance service, on a Husqvarna SM 125 enduro motorcycle. …read all…
Posted on 12 February 2024 by ScegliAuto
Checks and maintenance (1) Brake discs (1) Engine oil (1) Brake pads (2) Transmission (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos