Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : Disassembly of the Hyundai I20 timing chain

Hyundai I20 - Video tutorial

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Timing belt
Operation: Disassembly of the Hyundai I20 timing chain

In this video tutorial we will see the main instructions to remove the timing belt of a Hyundai I20. First of all, we lift the bonnet of our car: then we go to remove the fixing screws of the alternator, in order to move it and have better access to the belt. At this point we are going to loosen the pretensioner with a socket wrench and we are going to remove it, as shown in the video; we just have to replace it with the new one, inserting it correctly. The disassembly of the water pump is also shown below!


Posted on 3 February 2024 by ScegliAuto



Hyundai I20 timing chain disassembly guide
Hyundai I20 (2008-2014 / MK 1, PB) Let's see in this guide the main instructions that will allow us to disassemble and replace the timing chain of the Hyundai I20. First of all, we ope
Guide to adjusting the timing chain of the Hyundai I20 1.4 CRDI
Hyundai I20 (2008-2014 / MK 1, PB) In this guide, we will briefly see the instructions that will allow us to adjust the timing chain of the Hyundai I20 1.4 CRDI. After removing all the
How do you replace the timing chain of the Hyundai I20?
Hyundai I20 (2014-2021 / IB, MK 2, GB) In order to replace the timing chain of the Hyundai I20, you need to open the hood so that you can access the components on the left side of the engi

    Frequently Asked Questions

    • Hyundai I20 2008-2014 - What problems does the distribution chain of the Hyundai I20 have? Read Answer
    • Hyundai I20 2014-2021 - After how many km do you change the timing chain in the Hyundai i20? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos