Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix20
    4. : How to replace the cabin filter of the Hyundai IX20.

Hyundai ix20 - Video tutorial

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Cabin air filter
Operation: How to replace the cabin filter of the Hyundai IX20.

If you own a Hyundai ix20 and want to replace the cabin air filter yourself, then all you have to do is follow the steps described in the following mini-guide. First, reach the passenger side and open the glove box compartment. Then, locate the two screws located at the top of the compartment and unscrew them using a crosshead screwdriver. Once you have done this, remove the cover of the filter box and proceed with replacing the filter. Finally, reattach the cover of the filter box and you are done.


Posted on 4 April 2023 by ScegliAuto



Hyundai Ix20 cabin air filter replacement
Hyundai ix20 (2010-2019 / OJ) Let's find out in this guide how to remove and replace the cabin air filter or the pollen filter of the Hyundai Ix20, following the instructions belo
How to replace the cabin air filter on a Hyundai iX20
Hyundai ix20 (2010-2019 / OJ) Before we can begin, we will have to go and sit in the front passenger seat of our Hyundai iX20. Let's start by opening the door of the glove compart
What is the Hyundai IX20 fuse scheme?
Hyundai ix20 (2010-2019 / OJ) In this video we can see the position of the fuse boxes in the Hyundai IX20 and the relative diagrams, to be consulted in case we need to check the f

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos