Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : How to replace the wheel of the Hyundai Sonata.

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata MK 6, YF - Years 2010-2015
Part: Wheel
Operation: How to replace the wheel of the Hyundai Sonata.

In today's video tutorial, we will see step-by-step instructions on how to disassemble and replace the wheel with the spare one on the Hyundai Sonata. First, we open the rear tailgate of the trunk and start lifting the floor shelf, extracting the spare wheel and replacement kit. Then, we loosen the wheel bolts with the appropriate key, lifting the car with the jack, as shown in the video. At this point, we remove and replace the wheel with the spare one, fixing the wheel correctly by tightening the bolts in a crossed pattern, following the video until the end!


Posted on 16 May 2023 by ScegliAuto



Where is the fuse box located in the 2016 Hyundai Sonata?
Hyundai Sonata (2015-2019 / LF) In the following guide, we will discover together where the box containing all the various fuses of your 2016 Hyundai Sonata is located. Before start
How to replace the air filter of a 2013 Hyundai Sonata.
Hyundai Sonata (2010-2015 / MK 6, YF) In the following guide dedicated to your 2013 Hyundai Sonata, we will give you all the necessary instructions so that you can quickly and safely repl
How to reset the service light on the Hyundai Sonata?
Hyundai Sonata (2015-2019 / LF) As we can see in this tutorial, resetting the service on the Hyundai Sonata is an extremely simple and fast operation. Before doing so, we must have

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos