Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : How to replace the arrow glass of the Hyundai I10.

Hyundai I10 - Video tutorial

Model: Hyundai I10 MK 2, IA - Years 2013-2020
Part: Side indicator light
Operation: How to replace the arrow glass of the Hyundai I10.

To replace the arrow glass in the Hyundai I10's side mirror, we start by using a plastic tool to detach the mirror glass by levering it from the top. With the same plastic tool, we insert it between the mirror cover and the arrow glass to detach the mirror cover. Now, we unscrew the rear screw of the arrow glass, remove the arrow glass, disconnect the LED bulb, take the new arrow glass, reconnect the LED bulb to the bulb holder, reposition the arrow glass, screw in the screw, reattach the mirror cover, and reattach the glass. Now, we can check the proper functioning of the bulb.


Posted on 10 October 2023 by ScegliAuto



How to open the fuel door of the Hyundai i10.
Hyundai I10 (2013-2020 / MK 2, IA) As you can see very well in the video, opening the fuel door (gasoline) of your Hyundai I10 car is very simple. Unlike other cars where you simply pr
How to remove the gear knob of a Hyundai I10
Hyundai I10 (2007-2013 / MK 1, PA) Before we can start, we will have to go and sit in the driver's seat of our Hyundai I10. So let's start by grabbing the gear knob with your hand. Aft
How do i replace the battery of the Hyundai I10?
Hyundai I10 (2007-2013 / MK 1, PA) In order to replace the Hyundai I10 battery, you have to open the hood to access the components inside the engine compartment: the battery is positio

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos