Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : How to remove the front door panel of a Hyundai I20

Hyundai I20 - Video tutorial

Model: Hyundai I20 IB, MK 2, GB - Years 2014-2021
Part: Door panel
Operation: How to remove the front door panel of a Hyundai I20

In this video we see how to remove the front door panel of a Hyundai I20: we will start by removing the plastic cover next to the interior handle, in order to uncover the retaining screw; we will do the same with the central handle. Unscrew the two screws (keep them in a safe place, as we will need them again later); remove the plastic triangle covering the internal attachments of the rearview mirror. Now we can start gently prying (it would be better with a plastic spatula) to detach the panel from the door. Remove all electrical connectors and attachments on the panel. If we are not sure, do not hesitate to take a photo, so we can put everything back in place later. Operation completed.


Posted on 20 February 2024 by ScegliAuto



How to replace the hyundai i20 power window switch
Hyundai I20 (2008-2014 / MK 1, PB) In this short and simple guide, let's see how to disassemble and replace the Hyundai I20 window regulator button, following the instructions below. F
Remove the door panel on Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Let's see how to remove the rear door panel of the Hyundai I20. We remove the plastic screw cover cap in the space of the door opening lever, we unsc
Remove the door panel on a Hyundai i20
Hyundai I20 (2014-2021 / IB, MK 2, GB) Let's find out in this video tutorial how to remove the door panel on a Hyundai i20, model produced from 2014 to 2021. First we have to remove the sc

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos