Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : How to replace the thermostat of the Hyundai I10 1.2

Hyundai I10 - Video tutorial

Model: Hyundai I10 MK 1, PA - Years 2007-2013
Part: Thermostat
Operation: How to replace the thermostat of the Hyundai I10 1.2

In this guide we will see the main instructions useful for disassembling and replacing the thermostat of the Hyundai I10. First, open the hood and start disassembling and removing the front bumper, unscrewing all the fixing screws; then disconnect the intake hose and remove the air filter box. At this point, unscrew the throttle body screws, then unscrew the thermostat pipe; then remove the thermostat, draining the coolant into a container. Install the new original thermostat and reassemble everything!


Posted on 12 April 2024 by ScegliAuto



How to replace the thermostat on a Hyundai i10
Hyundai I10 (2007-2013 / MK 1, PA) Before we can begin, we will have to go to open the front hood of our Hyundai i10, and then remove the battery, so as to work in total safety. So let
How to open the fuel door of the Hyundai i10.
Hyundai I10 (2013-2020 / MK 2, IA) As you can see very well in the video, opening the fuel door (gasoline) of your Hyundai I10 car is very simple. Unlike other cars where you simply pr
How to remove the gear knob of a Hyundai I10
Hyundai I10 (2007-2013 / MK 1, PA) Before we can start, we will have to go and sit in the driver's seat of our Hyundai I10. So let's start by grabbing the gear knob with your hand. Aft

Other guides that may interest you

    Frequently Asked Questions

    • I10 2007-2013 - Where is the thermostat located in the Hyundai I10? Read Answer
    • I10 2007-2013 - How do you install the thermostat in a Hyundai I10? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos