Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : How to open the hood of the Hyundai I30

Hyundai I30 - Video tutorial

Model: Hyundai I30 MK 2, GD - Years 2011-2016
Part: Checks and maintenance
Operation: How to open the hood of the Hyundai I30

Today's instructions will show us how to open the hood of the Hyundai I30, in simple steps. First, we open the front door on the driver's side and start pulling the hood release lever which we find at the bottom; then we move to the front of the vehicle and go to move the hood lock lever, located near the bumper grille and the hood, as shown in the video. At this point, we lift the hood and secure the rod to lock it; finally, we lower the hood and apply some pressure to close it.


Posted on 20 May 2024 by ScegliAuto



How to properly open the front hood of the Hyundai I30
Hyundai I30 (2016-2023 / PD, MK 3) If you have just bought a new Hyundai i30 and you do not know how to open the front hood do not worry because in this guide you will find everything
How do you replace the front headlight bulb of the Hyundai I30?
Hyundai I30 (2016-2023 / PD, MK 3) In order to replace the front headlight bulb of the Hyundai I30, you need to open the hood so that you have access to the components located inside t
Where is the OBD port located on the Hyundai I30?
Hyundai I30 (2016-2023 / PD, MK 3) If you own a 2021 Hyundai i30 and want to find out where the OBD port is located, which allows you to connect a professional diagnostic tool, then al

Other guides that may interest you

    Frequently Asked Questions

    • I30 2011-2016 - What are the problems with the Hyundai I30 Wagon? Read Answer
    • I30 2007-2012 - How to fix a Hyundai I30 steering column problem? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos