Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Infiniti
    3. : QX70 : How to replace the light bulb on

Infiniti QX70 - Video tutorial

Model: Infiniti QX70 S51 - Years 2009-2017
Part: Headlight bulb
Operation: How to replace the light bulb on

If we want to proceed with the replacement of the headlight bulb on this car model, perhaps replacing it with an equivalent LED model, in the description below we will find the indications and methods to follow to do a good job. The first thing you need to do is lift the bonnet and locate the light with the bulb to be replaced. Then remove the fixing clips of the plastic panel located above the grille. From under it we will be able to access the back of the lighthouse to extract the bulb to be replaced and disconnect the power terminal. Then proceed to reposition the new bulb and insert it in the headlight and then reconnect the connector.


Posted on 7 June 2023 by ScegliAuto



Interior light bulb replacement
Kia Soul (2008-2014 / MK 1) To replace the interior light bulb, first unhook the light by levering along the edges between the frame and the glass of the light itself (pay close
Rear light bulb replacement
Mercedes Classe C (2000-2007 / W203) To access the rear brake light bulb, open the luggage compartment and the carpeted flap located just behind the light from where the bulb holder (fix
How to replace the trunk light bulb of the Toyota Corolla.
Toyota Corolla (2000-2007 / MK 2) Below we will see the instructions that will allow us to disassemble and replace the light bulb in the luggage compartment of the Toyota Corolla. Fir

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos