Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Infiniti
    3. :
  3. QX60
    4. : How to open the blocked fuel door in the Infiniti QX60?

Infiniti QX60 - Video tutorial

Model: Infiniti QX60 L50 - Years 2013-2020
Part: Checks and maintenance
Operation: How to open the blocked fuel door in the Infiniti QX60?

In the Infiniti QX60, it can happen that the fuel door gets stuck, for example due to a problem with the control button or the lock actuator. In these cases, we can perform an emergency opening by following the simple procedure shown in this tutorial. First, we open the trunk door, then we release the left side cover by unscrewing the indicated screws. We then locate the actuator, grab the external pin, and pull it towards the rear of the vehicle to unlock the lock. At this point, we can refuel and repair the faulty element.


Posted on 29 March 2024 by ScegliAuto



How to replace the headlight bulb on the Infiniti QX60?
Infiniti QX60 (2013-2020 / L50) In order to replace the headlight bulb of the Infiniti QX60 you have to go to open the hood, so that you can have access to the components in the bac
How to change the air filter on an Infiniti QX60.
Infiniti QX60 (2013-2020 / L50) We are changing the cabin filter - also known as the pollen filter - on the Infiniti QX60. The cabin filter compartment is located under the glove co
How to reset the maintenance indicator on the Infiniti Qx60
Infiniti QX60 (2013-2020 / L50) Fortunately, the procedure required to manually reset the maintenance warning light on your Infiniti Qx60 is very simple and you can complete it in s

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos