Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Isuzu
    3. :
  3. Isuzu D Max
    4. : How to replace the battery of the Isuzu D-Max pickup remote control?

Isuzu Isuzu D Max - Video tutorial

Model: Isuzu Isuzu D Max Rt50, Rt85 - Years 2011-2023
Part: Key
Operation: How to replace the battery of the Isuzu D-Max pickup remote control?

In this tutorial we can see how to replace the battery of the remote control of the Isuzu D-Max pickup, an extremely simple and quick operation. To do this, we will need a replacement battery of type CR1620 and a small screwdriver with a flat tip. First of all, we locate the slot in the lower right corner of the remote control, then insert the tip of the screwdriver inside, lever and separate the two halves. We then remove the internal cap, remove the old battery and, obviously respecting the polarity, insert the replacement one. Finally, we reassemble everything.


Posted on 24 March 2024 by ScegliAuto



How to replace the remote control battery of the Isuzu D-Max?
Isuzu Isuzu D Max (2011-2023 / Rt50, Rt85) Replacing the remote control battery of the Isuzu D-Max is a very simple and economical operation, let's see how to proceed in this tutorial. To do t
How to replace the battery of an Isuzu D Max key
Isuzu Isuzu D Max (2011-2023 / Rt50, Rt85) Today we will explain how to replace the battery of an Isuzu D Max key. First, insert a flat-head screwdriver into the key remote to pry it open. Onc
Where is the fuse box located in the Isuzu D Max?
Isuzu Isuzu D Max (2011-2023 / Rt50, Rt85) If you want to discover where all the various fuses are located in your Isuzu D Max, all you have to do is carefully read this new mini guide and fol

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos