Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. IVECO
    3. :
  3. Eurocargo
    4. : How to change the language of the Iveco Eurocargo

IVECO Eurocargo - Video tutorial

Model: IVECO Eurocargo MK 5 - Years 2015-2023
Part: Checks and maintenance
Operation: How to change the language of the Iveco Eurocargo

Following these short and simple steps, we will see how to change the time on the display of the dashboard on the Iveco Eurocargo vehicle. First of all, we get on board the vehicle and start up the dashboard; to change the time, we will need to use the controls found on the panel at the top, as shown in the video. At this point, we proceed to change the hour and minutes, then exit the setting to save the changes made; it is possible to change the time at any time, following the video tutorial until the end.


Posted on 14 May 2024 by ScegliAuto



How do you set the Iveco Eurocargo clock?
IVECO Eurocargo In order to set the Iveco Eurocargo clock, you need to turn on the instrument panel, so that you can then move around the menu with the steering whee
What does ibc Iveco Eurocargo mean
IVECO Eurocargo (2002-2008 / MK 1) The display in the center of the Iveco Eurocargo instrument panel represents the so-called IBC system: Iveco Body Computer; this device allows you to
How to remove the door panel of the Iveco Eurocargo?
IVECO Eurocargo To be able to remove the door panel from the Iveco Eurocargo you need to pry with an object such as a screwdriver, so that the protection panels can

    Frequently Asked Questions

    • Eurocargo - How do you behave in the event of a failure of the VCM control unit of an Iveco Eurocargo? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos