Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jaguar
    3. :
  3. Xkr
    4. : How do you remove the wheel arch from the Jaguar XKR?

Jaguar Xkr - Video tutorial

Model: Jaguar Xkr MK 1, X100 - Years 1996-2006
Part: Checks and maintenance
Operation: How do you remove the wheel arch from the Jaguar XKR?

In order to remove the wheel arch of the Jaguar XKR you have to loosen the bolts that secure the corresponding wheel, removing the latter, in order to have easier access to the wheel arch. Once the wheel has been removed, it will be possible to access the internal screws and rivets, which must all be removed; the screws also have different dimensions which are shown in the tutorial. Once the wheel arch has been released, it will be possible to remove it from its housing, replacing it with a new spare part and fitting the corresponding wheel.


Posted on 14 July 2022 by ScegliAuto



How to open the trunk of a Jaguar XKR
Jaguar Xkr (1996-2006 / MK 1, X100) Before we can begin, we will have to get out of the cockpit of our Jaguar XKR. The lock to open the boot is positioned inside the rear emblem on whic
How to replace the air filter on Jaguar XKR
Jaguar Xkr (1996-2006 / MK 1, X100) If we want to personally take care of the replacement of the air filter on this car we can take a look at the video and description that is given bel
Service belt replacement on Jaguar XKR
Jaguar Xkr (1996-2006 / MK 1, X100) Raise the hood as much as possible, as shown in the video, up to the perpendicular position with respect to the car. To do this, unclip the lower att

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos