Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jaguar
    3. :
  3. Xj
    4. : How do you remove the door panel of the Jaguar XJ?

Jaguar Xj - Video tutorial

Model: Jaguar Xj MK 9, X351 - Years 2009-2019
Part: Door panel
Operation: How do you remove the door panel of the Jaguar XJ?

In order to remove the door panel of the Jaguar XJ, you need to loosen the screws that secure the panel to its housing: these screws will be located in the handle seat and in the lower central part of the armrest. Once both screws have been loosened and removed, you can pry the door panel from its housing using an object such as a screwdriver. Once the old panel has been removed, you can then install the new one. This new panel should be secured with screws to ensure that everything is functioning properly.


Posted on 31 March 2024 by ScegliAuto



How do I remove the door panel from the Jaguar XJ?
Jaguar Xj (1997-2003 / X308) In order to remove the door panel of the Jaguar XJ you have to loosen the screw located inside the seat of the interior handle. Subsequently it will
Where is the fuse box located in the Jaguar XJ?
Jaguar Xj (2009-2019 / MK 9, X351) Unlike many other cars, in the Jaguar XJ the fuse box is not located inside the dashboard or in the engine compartment. Below, we will discover toget
Where is the fuse box of the Jaguar XJ located?
Jaguar Xj (2009-2019 / MK 9, X351) If you need to work on the fuses of your Jaguar XJ (year 2009-2019) but don't know where they are located, don't worry because you just need to caref

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos