Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Jaguar
  4. :
  5. F-Pace
  6. : How to turn on the lights on the Jaguar F-Pace

Jaguar F-Pace - Video tutorial

Model: Jaguar F-Pace MK 1 - Years 2016-2024
Part: Checks and maintenance
Operation: How to turn on the lights on the Jaguar F-Pace

Today's guide will show us how to turn on all the lights, both the position lights and the low and high beams of the Jaguar F-Pace. First, we get into the car and start the engine; we use the light activation control found on the left lever, as shown in the video. At this point, we lower the knob to the auto mode, which will activate all the headlights completely automatically based on external light; it is possible to move the knob again to manually activate the low beams and finally the front and rear fog lights!


Posted on 3 May 2024 by ScegliAuto



Where is the fuse box located in the Jaguar F-Pace?
Jaguar F-Pace (2016-2024 / MK 1) .. this new mini guide dedicated to your Jaguar F-Pace, we will help you locate the fuse box located inside the car in just a few seconds and above all..
How to perform a service reset in a 2017 Jaguar F-Pace
Jaguar F-Pace (2016-2024 / MK 1) .. possible to reset the service in a 2017 Jaguar F-Pace, following some practical advice: the first thing to do is vehicle maintenance such as changing..
How to connect the battery charger to the Jaguar F-Pace
Jaguar F-Pace (2016-2024 / MK 1) .. to connect the battery charger to the Jaguar F-Pace, but also to the E-Pace, following these simple steps. First of all, we open the tailgate of the..

    Frequently Asked Questions

    • F Pace 2016-2024 - How much does a service cost for the Jaguar F-Pace? Read Answer
    • F Pace 2016-2024 - How often is the Jaguar F Pace serviced? Read Answer
    • F Pace 2016-2024 - How much does the service cost of the Jaguar F-Pace? Read Answer
    • F Pace 2016-2024 - How much does a service cost for the Jaguar F-Pace? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos