Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : How to replace the turn signal buzzer on the Jeep Compass?

Jeep Compass - Video tutorial

Model: Jeep Compass 552, MK 2 - Years 2016-2024
Part: Dashboard
Operation: How to replace the turn signal buzzer on the Jeep Compass?

Before we begin, let's make sure we have all the tools listed at the beginning of the video. Then, take the instrument panel and position it in a way that allows easy access to the securing screws. Unscrew them and then use a flat object to leverage into the appropriate slots and release the plastic clips. Remove the front panel and the back cover. Take the pliers and use them to release the fasteners of the buzzer, remove it from its housing, and replace it, making sure to align the contacts. Finally, reposition each part in its place.


Posted on 13 September 2023 by ScegliAuto



How to remove the oil change warning light in Jeep Compass?
Jeep Compass (2016-2024 / 552, MK 2) Removing the engine oil change signal from your Jeep Compass is very simple, we can see how to proceed in this tutorial. Obviously, this operation sh
A windshield wiper that interferes with the turn signals on a Jeep Compass.
Jeep Compass (2006-2016 / MK 49, MK 1) In this video we see how on this Jeep Compass there is a strange problem: almost every time the turn signals are activated, the windshield wipers als
How do you reset the tire pressure warning light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) When the tire pressure warning light illuminates on the display of the Jeep Compass in conjunction with an audible signal, it means that at least one

    Frequently Asked Questions

    • Compass 2016-2025 - What warning lights are there in the instrument panel of my Jeep Compass? Read Answer
    • Compass 2016-2025 - What does the orange light on Jeep Compass mean? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos