Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to reset the service light on a 2013 Jeep Wrangler

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Checks and maintenance
Operation: How to reset the service light on a 2013 Jeep Wrangler

Resetting the service light on the 2013 Jeep Wrangler is very simple; this operation should be done after every car service. The first thing to do is to insert the key and turn it to the ON position and then turn on the instrument panel. The second thing to do is to press the accelerator pedal three times in a row and only after hearing the final sound turn off the instrument panel. To perform a thorough check, turn on the instrument panel and verify that the reset operation was successful. If the result is negative, you can try the maneuver again.


Posted on 11 May 2024 by ScegliAuto



How to reset the "Service" light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before we can begin, we will need to sit in the driver's seat of our Jeep Wrangler. Let's start by activating the instrument panel, but without start
How to reset the service light on the Jeep Wrangler JK
Jeep Wrangler (2007-2018 / MK 3, JK) In this short guide we will see how to reset the service light of the ordinary maintenance of the oil change of the Jeep Wrangler JK, third generatio
Jeep Wrangler service warning light reset
Jeep Wrangler (2007-2018 / MK 3, JK) Today we will see the basic instructions to be able to reset the routine maintenance service light in a Jeep Wrangler. First we get on board the car:

    Frequently Asked Questions

    • Wrangler 2007-2018 - What problems could the Jeep Wrangler 2.8 crd have? Read Answer
    • Wrangler 2007-2018 - Every how many miles should the Jeep Wrangler be serviced? Read Answer
    • Wrangler 2007-2018 - How many miles can a Jeep Wrangler travel? Read Answer
    • Wrangler 2007-2018 - What are the warning lights on the dashboard of the Jeep Wrangler? Read Answer
    • Wrangler 1997-2007 - What lights are on the panel of the Jeep Wrangler? Read Answer
    • Wrangler 2007-2018 - How do you turn off the engine oil change light on a 2.0 diesel Jeep Wrangler? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos