Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : Replacement of the air filter of the Jeep Compass MK2

Jeep Compass - Video tutorial

Model: Jeep Compass 552, MK 2 - Years 2016-2024
Part: Air filter
Operation: Replacement of the air filter of the Jeep Compass MK2

To ensure a constant and clean airflow to the injection system of the Jeep Compass, a filter is installed on the intake mouth, which must be replaced periodically to ensure its effectiveness. To replace it, we open the hood of the engine compartment, we will find the filter box on the passenger side near the fender. Using a long cross-head screwdriver, we unscrew the three screws that secure the cover, lift it and move it sideways, remove the old filter element and replace it with a new one, make sure the rubber edge adheres well and close the cover by securing it with its three screws.


Posted on 18 May 2024 by ScegliAuto



How to replace the air filter on Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) In this video tutorial we can see how it is possible to replace the air filter on Jeep Compass. The first thing to do is to purchase a new air filter
Jeep Compass air conditioning filter replacement
Jeep Compass (2006-2016 / MK 49, MK 1) Jeep Compass cabin air filter replacement? Let's see how the air filter is removed. We open the glove box, unhook the guides on the side of the plast
Air filter replacement on Jeep Compass
Jeep Compass (2016-2024 / 552, MK 2) To replace the Jeep Compass air filter, follow these directions. Open the bonnet and remove the plastic battery cover by turning the fixing pins 180Â

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos