Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Renegade
    4. : How to replace the gear knob of the Jeep Renegade

Jeep Renegade - Video tutorial

Model: Jeep Renegade BU, MK 1, 520 - Years 2014-2023
Part: Gear Shift Knob
Operation: How to replace the gear knob of the Jeep Renegade

Today's guide will show us how to disassemble and replace the gear shift knob of the Jeep Renegade, following the instructions below. First, we climb aboard the cabin and start prying on the plastic gear shift cover to remove it; then we use a socket wrench to unscrew the central screw of the gear shift knob, as shown in the video. At this point, we pull the gear shift knob off the lever to detach it, replacing it with the new one; we properly secure it with the screw on the lever, finally reassembling the small gear shift cover!


Posted on 19 May 2024 by ScegliAuto



How to replace the gear knob on Jeep Renegade.
Jeep Renegade (2014-2023 / BU, MK 1, 520) In this video, we see how it is possible to replace the gear knob on Jeep Renegade. First we have to put the vehicle in safety with the handbrake on;
How to replace the gear shift knob on the Jeep Renegade.
Jeep Renegade (2014-2023 / BU, MK 1, 520) To replace the gear knob on the Jeep Renegade, you will need a 10mm socket wrench, a small screwdriver, a utility knife, and long-nose pliers. The fi
Replacement gear knob on Jeep Renegade
Jeep Renegade (2014-2023 / BU, MK 1, 520) With a pointed tool, remove the plate above the gear knob on which the gears are marked. Once this is done, unscrew the now uncovered nut with a smal

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos