Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. :
  3. Rkf 125
    4. : How do you replace the exhaust of the Keeway RKF 125?

Model: Keeway Rkf 125
Part: Muffler
How do you replace the exhaust of the Keeway RKF 125?

In the Keeway RKF 125, the operation of replacing the exhaust pipe is carried out by unscrewing the screws that fix it to the lower support near the crank and to the fender in the rear. Once these two screws have been removed, it will be possible to loosen the two screws that fix the initial part of the exhaust pipe in the front of the vehicle. In this way, the old exhaust pipe can be completely removed from its seat, replacing it with a new spare part; after installation, it must be verified that everything works by reinserting the panel in the lower part of the vehicle.


Posted on 26 April 2024 by ScegliAuto



How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The operation of replacing the exhaust on the Keeway RKF 125 is carried out by loosening the screws that fix it at the lower support near the cranksh
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The exhaust pipe of the Keeway RKF 125 can be replaced by loosening the screws that fix it at the lower support, near the crank and at the rear fende
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The operation of replacing the exhaust on the Keeway RKF is carried out by loosening the screws that fix the exhaust terminal at the lower support ne

How to replace the Peugeot Viva City starter gear

Today we will see, in this video tutorial, how to disassemble and replace the starter gear of the Peugeot Viva City scooter. First of all we put our scooter on the central stand and we begin to unscrew the fixing screws located on the sides of the transmission side casing, in order to remove it; after which we unscrew the central nut of the fan, removing it and thus accessing the gear, as shown in the video. At this point we replace the starter gear with the new one, with the original spare; then we reassemble the fan and the clutch housing, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos