Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Cee D
    4. : How do you replace the battery in the Kia Ceed?

Kia Cee D - Video tutorial

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Battery
Operation: How do you replace the battery in the Kia Ceed?

To be able to replace the battery of the Kia Ceed you have to go and open the hood, so that you have access to the components inside the engine compartment. The battery will in fact be positioned inside it, immediately below the air filter: to access the battery itself it will in fact be necessary to remove the air filter box. Once this has been removed, you can unscrew the bolts that secure the battery inside its housing, also disconnecting the power cables. Once the device has been released, it will be possible to replace it with a new one.


Posted on 19 December 2022 by ScegliAuto



How to reset the service light on the Kia Ceed.
Kia Cee D (2012-2018 / JD, MK 2) In this new guide dedicated to your Kia Ceed (2012-2018), we will show you a very simple and quick method through which you can manually reset the se
How to replace the battery in the key of the Kia Ceed (2015)
Kia Cee D (2012-2018 / JD, MK 2) With today's tutorial we will see how to replace the key battery of the 2015 Kia Ceed; it is a very simple operation and within everyoneâ € ™ s reach
How to replace license plate light on Kia Ceed 2015
Kia Cee D (2012-2018 / JD, MK 2) In the following guide dedicated to all of you owners of a Kia Ceed second series (year 2015) we will find out step by step how to replace the licens

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos