Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Rio
    4. : Power steering pump belt replacement

Kia Rio - Video tutorial

Model: Kia Rio DE, MK 2 - Years 2005-2011
Part: Steering wheel
Operation: Power steering pump belt replacement

The car in question is equipped with two auxiliary belts, one toothed dedicated to the power steering pump only and the other with grooves that drives the alternator, water pump and air conditioning compressor: the latter is located in front of that of the power steering and must therefore both must be disassembled, therefore it is advisable to replace both. Then loosen the alternator fixing pin and that of the belt tensioning adjuster to be able to loosen and remove this; also loosen the fixing pins of the power steering pump so that it slides backwards and also this belt can be removed; then insert the new power steering belt, the new alternator belt by passing it between the various pulleys and then put everything under tension through the appropriate adjusters.


Posted on 28 August 2023 by ScegliAuto



Service belts replacement instructions
Kia Rio (2005-2011 / DE, MK 2) The car model in question is equipped with two service belts, one dedicated to the power steering pump and the other that controls the alternator and
Replacement of auxiliary belts
Kia Rio (2005-2011 / DE, MK 2) The car model in question is equipped with two auxiliary belts, one dedicated to the power steering pump and one that controls the alternator and the
Timing belt replacement
Kia Rio (2005-2011 / DE, MK 2) This video shows us how to replace our timing belt. First we lift the car on a jack or jack stands and unscrew the right front wheel so that we can w

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos