Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : How to replace the front headlight and its bulbs of the Kia Picanto.

Kia Picanto - Video tutorial

Model: Kia Picanto MK 1, 2A - Years 2004-2011
Part: Headlight
Operation: How to replace the front headlight and its bulbs of the Kia Picanto.

Today's guide will show us the process of disassembling and replacing the front headlight and its bulbs of the Kia Picanto. First, we open the engine hood and start unscrewing the fixing screws that we find on the upper and side part of the front headlight; then we disconnect the electrical connector of the bulbs that we find on the back part, as shown in the video. At this point, if necessary, we replace the bulbs of the headlight or the entire optical group, making the electrical connection and fixing it back to the body, following the video tutorial until the end!


Posted on 24 January 2024 by ScegliAuto



How to replace the lights of the Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) How to replace the headlights of the Picanto? Let's see how to remove the headlight bulbs. We lift the front hood, remove the inspection cap at the r
Lamp replacement on Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) We want to replace the bulbs of the headlights of the Kia Picanto? Operation not difficult, let's see how to do it. We lift and open the front hood o
How to replace the front headlight bulb of the Kia Picanto.
Kia Picanto (2004-2011 / MK 1, 2A) Today's instructions will show us how to disassemble and replace the front headlight bulb of the Kia Picanto, in simple steps. First, we open the car

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos