Do it yourself
| ||||
|
Model: Ktm 300 Tpi
Start the engine and leave it running for a few minutes, so that the oil inside the bike warms up well becoming less dense, favoring the subsequent leakage. Unscrew the lower drain bolt, which is located near the pedal and collect the used oil in a pan. You should have drained just over 700ml of lubricant, so prepare the same amount of new 15W-50 four-stroke oil. Clean the drain plug with kitchen paper and screw it in place. Unscrew the load bolt and insert the new lubricant, which will be a much lighter color than the old one.
Posted on 9 March 2024 by ScegliAuto
How to perform an oil change on a KTM 300TPI
300 Tpi Heating: start the engine and let it run for a few minutes to warm up the oil, making it less dense and facilitating drainage. Draining: place the mo |
Change the Yamaha Tracer 900 engine oil and oil filterWe see below the step-by-step instructions to be able to carry out the routine maintenance service, replacing the engine oil and the oil filter, of the Yamaha Tracer 900. First of all we put our bike on the central stand and begin to unscrew the vent bolt of the the oil that we find under the engine, letting it drain in a container for about ten minutes; after which we use the special key to unscrew and remove the filter cartridge, replacing it with the new one, as shown in the video. Finally, unscrew the filler cap and top up with the new oil! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |